TitanParts 鈦金屬在1791年被克拉普羅斯(Klaproth)發現,在地球的含量僅次於鋁、鐵、鎂的金屬物質,其之所以命名為"鈦",是以希臘神 (Titan,泰坦) 為名,鈦合金具有重量輕、強度大、彈性高、耐熱性強、耐低溫性能及耐腐蝕等優特性,因此鈦合金於 ...
鈦的化學成份, 線性熱膨脹係數, 原子量 Chemical Composition ( % Maximum ) Mechanical Properties ( Min ) N C H Fe O Al V Rasiduals Max. Total Others Ti UTS ksi 0.2% YS ksi % El Grade 1 0.03 0.08 0.015 0.20 0.18 - - 0.40 - Bal 35 25 24 Grade 2 0.03 0.08 0.015 0.30 0.25
3AL-2.5V - Titanium Tubing - TI-3Al-2.5V Titanium Tubing | TW Metals Ti-3Al-2.5V titanium tubing can be cold worked by standard tube manufacturing processes, is weldable and can be strengthened by a combination of cold working and subsequent ...
Titanium Grade 9 DATA Ti-3Al-2.5V SHEET - Smiths High Performance Titanium Grade 9 is sometimes referred to as 'half 6-4'. This alloy of titanium with 3% aluminium and 2.5% vanadium offers 20 to 50% greater mechanical strength than the commercially pure (CP) titanium grades, but is more formable and weldable than ...
Titanium Ti Grade 1/2/5/7/9/12 UNS R50400 R50400 R56400 R52400 R56320 R53400 Supplier of Titanium UNS R50400 R50400 R56400 R52400 R56320 R53400 Titanium Tubing, Titanium Pipe, Titanium Round Bar, Titanium Plate/Sheet, Titanium Seamless & Welded Butt-Weld Fittings, Titanium Specialty Forgings ... Titanium Grade 1 - UNS R50250
Titanium Alloys - Titanium Ti-6Al-4V ELI (Grade 23), CP Titanium Grade-2, Titanium Grade-5 Round Bar : Titanium Ingots : Commercially Pure (Ti CP) Titanium Ingots (Grade 2, Grade 3, Grade 4), Ti 6Al-4V (Ti 6-4) , Ti 3Al-2.5V and other grades. Ingots are available in diameters 150 mm (6"), 200 mm (8"), 280 mm (11"), 360 mm (14"), 500 mm (20"), 700 mm (27.
Technical Data - North American Alloys - Your source for Titanium Technical Data Ti-3Al-2.5V (Grade 9) Primarily a tubing alloy, it is used in aircraft hydraulic systems and sports and recreational products. Available in 2 conditions, annealed and cold worked stress relieved, it combines moderate strength with good cold
49 CFR 178.46 - Specification 3AL seamless aluminum cylinders. | LII / Legal Information Institute (1) Cylinder shells must be manufactured by the backward extrusion method and have a cleanliness level adequate to ensure proper inspection. No fissure or other defect is acceptable that is likely to weaken the finished cylinder below the design strength
6Al-6V-2Sn - Continental Steel & Tube Company © 2014 Continental Steel & Tube Company P.O. BOX 030040 Fort Lauderdale, FL, 33303 Sales@ContinentalSteel.com Toll Free US: 888.313.5790 Toll Free US Fax: 800.318.7982 International: 954.332.2290 Fax: 954-332-2296
Technical Data - North American Alloys - Your source for Titanium Technical Data Ti-15V-3Cr-3Al-3Sn (Ti-15-3-3) Ti-15-3-3 is a metastable beta alloy and is highly cold formable and heat treatable. It is used primarily in sheet and foil applications. Chemistry Limits (%) V 14.0 - 16.0 Cr 2.5 - 3.5 Al 2.5 - 3.5 Sn 2.5 - 3