XP安裝AHCI Driver | 在水一方 2013年12月30日 - XP 要安裝ahci Driver 是件麻煩事，因為XP預設不支援ahci，一旦在bios內將sata設定為ahci模式之後，XP不認得，直接給你跳藍底白字。傳統的解法 ...
[教學] 如何不重裝Windows XP 啟用AHCI 功能@ Frank's Blog :: 痞客 ... 2011年10月24日 ... 很多Windows XP 的使用者，即使硬體設備已經有支援AHCI，但是實際上卻沒有在 作業 ... XP 安裝時，需要SATA 驅動程式才能辨識出你的SATA 硬碟.
[轉貼]獨家秘籍－免軟驅免重裝開啟AHCI功略(XP, VISTA) - ~~克雷格 ... 2011年7月28日 ... 好多朋友都知道SATA硬盤比IDE要好，不僅僅在外部接口的速率上有所提升，並且 功能，特性 ... 而如果需要在Windows XP/2K上安裝AHCI的驅動，那必須有一個軟驅 ，並且得在安裝時按f6才能安裝。 .... 此分類上一篇:修復磁碟的MBR.
Installing Windows XP With F6 AHCI/RAID Drivers From USB Only How to install Windows XP without F6 floppy AHCI drivers. Guide to setup Windows XP on AHCI/RAID disk from USB only. ... 1. What is AHCI/RAID drivers? Who needs them? Hard Disks (HDD) and Solid State Disks (SSD) are connected to the computer via ...
Windows XP with AHCI SATA drivers | Laptopish.com AHCI (Advanced Host Controller Interface) is standard defined by Intel that specifies the operation of SATA host bus adapters. AHCI is developed as improvement of SATA interface so how can improve the capabilities of the system. Because the AHCI standard
How to install an AHCI SATA driver in Windows XP, Vista and Win7 - MacRumors Forums How to install an AHCI SATA driver in Windows XP, Vista and Win7 Mac Pro ... Actually the order of things is generally the other way round. You force an AHCI driver which would cause a BSD if you would start Windows unmodified.
AHCI drivers for Windows XP professional on Elitebook 2560p - HP Support Forum - 1013521 Due to a specific piece of software I'm trying to setup Windows XP on an EliteBook 2560p with AHCI drivers for the SATA controller. Where can I ge... - 1013521
Install Windows XP on Dell Optiplex 755 / 760 / 960 without AHCI SATA Driver | Wayne Zimmerman's Blo Well I am using a Dell Optiplex 960 and it came with Vista and I reloaded it with XP so I know this is possible. I used the Intel Matrix Storage Manager (OS Pre-Install Driver Only). and installed the “Intel(R) ICH10D/DO SATA AHCI Controller” for each of
drivers - How to enable AHCI in Windows XP without reinstalling ... 22 May 2012 ... Current setup: A dual-boot machine with Windows XP installed on a SATA .... When installing XP, it is possible to load an AHCI driver from a ...
Installing Windows XP With F6 AHCI/RAID Drivers From USB Only How to install Windows XP without F6 floppy AHCI drivers. Guide to setup Windows XP on AHCI/RAID disk from USB only.
